9
7.3 Shelves (Optional)
Single door plasma freezers have the option to be ordered with 4 wire shelves and double door plasma freezers have
the option to be ordered with 8 wire shelves.
Maximum shelf capacity is 45 kg (100 lbs).
For safety in shipping, the shelves are packaged and secured inside the cabinet. Insert the shelf support hangers
(included inside the unit) into the built-in shelf supports (located on the inside walls of the cabinet interior) at the
desired locations. Position the shelves on the flat supports (refer to
Figure 1
). Do not position shelving to disrupt the
thermal
bottle(s).
7.4 Drawers
Single door plasma freezers come standard with 7 drawers and double door plasma freezers come standard with 14
drawers.
Drawers are shipped in a factory installed position that promotes uniform spacing between the drawers.
The drawer slides are adjustable to higher and lower positions in the cabinet. You can position these slides in the
vertical slots which are spaced at one-inch intervals. The drawers must be removed in order to
adjust the position of the drawer slides.
For CH1230, CH2330, and CH5030, the maximum drawer capacity is 27 kg (60 lbs). For CH3030, the maximum drawer
capacity is 36 kg (80 lbs).
CAUTION:
Risk of Abrasion. Hidden sharp edges may be present on drawers. Use appropriate Personal Protective
Equipment (such as gloves) while handling the drawers to avoid possible sharp points related injury.
7.4.1 Removing the Drawers
To remove the drawers, complete the following steps
(refer to Figure 2)
:
1. Pull the drawer towards you until the slides are fully extended.
2. Lift the back of the drawer to disengage the mounting tabs from the slots on the slides.
Note:
The drawers fit snugly between the slides. Push the back of the drawer from underneath to remove the drawer.
3. Raise the back of the drawer almost to a vertical position and disengage the front mounting clips from the sides.
Figure 1. Shelf Support Hanger
Содержание CAX1230LA
Страница 35: ...This page intentionally left blank...
