Cardin Elettronica ZVL414.04, Руководство пользователя

Страница: 14 / 48

14
L2
ON
Attention! Before memorising the transmitters for the first time remember to cancel
the entire memory content.
1a Remove jumper " J2 " from the interface
1b
Press button "
P1
" 3 times in sequence
on the interface
1c Press button " P1 " once more for
six seconds on the interface
1d The green LED " L1 " and the red LED " L2 "
will flash and remain lit during cancelling
1e The red LED " L2 " switches off and the
green LED "
L1
" will flash for a few seconds then
it too will switch off
At this point all codes have been cancelled!
2a Insert jumper " J2 " on the interface
2b
Press button "
P1
" for at least six seconds
2c Red LED " L2 " on the interface will flash
1 2 3
6 sec
L2
ON
L1
ON
L2
OFF
L1
ON
1. Cancelling the entire memory content
PROGRAMMING PROCEDURE
Pos.
A
2. Memorising the programming function access code
for remote memorisation from the keyboard
6 sec
Pos.
B