Cardiac Science Powerheart AED G3 Plus 9390A, Руководство оператора и по обслуживанию

Страница: 46 / 80

Setting the AED Internal Clock Version 112-2025-109 B 3-12
Setting the AED Internal Clock
The internal clock is preset at Central Standard Time and should be reset to
the correct date and local time. If applicable, the AED will automatically
adjust itself for Daylight Savings Time. This feature can be turned off using
the MDLink software. To set the clock, you will need a Windows 98 or
newer PC, RescueLink software installed, and the AED serial cable
connected to the PC.
To set the clock settings:
1
Ensure that the PC is set at the correct local time and date.
2
Open the lid of the AED and run the RescueLink software on the PC.
3
Connect the cable to the serial port on the AED.
4
Verify that the voice prompt states “Communications Mode”.
5
Click Communications on the main menu. Select AED Date and Time.
6
Click on the Get button to review the current time in the AED.
7
If the time and date is incorrect, click Set to set new time and date. The
AED date and time will automatically be updated to the PC’s time and
date.
Voice Prompts and Text Display
The voice prompts activate when the AED lid is opened and help guide the
operator through the rescue. The AED text display provides a visual display
of most of the audible voice prompts.