ECGC-70-002, Rev. 8, February 05, 2019
16
Always clean the ECG Check first and then disinfect it according to the instructions
provided below.
We recommend use of the Sani-Cloth® HB cleaning & disinfecting wipes (or equivalent)
for cleaning and disinfection of the ECG Check device.
The ECG Check is not intended for sterilization.
Cleaning
Wipe all exterior surfaces with a fresh Sani-Cloth® HB cloth to remove any visible soil or
residue. Discard the Sani-Cloth® HB cloth immediately.
Do not allow any liquid to enter the case, and avoid pouring water or other
liquids on the device while cleaning.
Never use abrasives such as wire wool or metal polish.
Disinfection
Using a new Sani-Cloth® HB cloth after cleaning, wipe all exterior surfaces of the ECG
Check and allow to air dry for 10 minutes. It is crucial that these instructions be
followed EXACTLY for the desired effect. See instructions provided with Sani-Cloth® HB
for more information.
Never expose the device to temperatures in excess of stated temperature
limitations.
Storage
Store the ECG Check in a dry temperate location.
Caution:
Do not store the ECG Check in a damp area, or in areas that experience
extreme heat or cold. These conditions can damage the internal
components and case of the ECG Check.
