background image

 

 

11

 
 
12. INVENTORY (MULTI DECK GAMES) 
To release an inventory of all playing cards that are actually in use on a table, enter menu:  

 

Press the two buttons on the rear display once simultaneously.  
(Display shows SELECT GAME) 

 

By tapping one of the buttons, scroll until display shows INVENTORY. 

 

Press both buttons again once simultaneously. 

 
Top light changes to flashing orange and display shows REMOVE CARDS FROM FRONT 
SHOE/ INSERT ALL CARDS. 

Follow display instruction; reinsert all discard cards as well. 

NOTE: If there has been any card jam some time ago, one2six will deliver cards to the front 
shoe until all remaining compartments of the wheel are emptied once. Thus one2six ensures 
that inventory is certain. 

TIP! 

In case you have chosen inventory during game operation between two hands and you 
notice that inventory will take too much time: 

-

 

Open cover. 

-

 

Switch power off; wait until indication lights are off. 

-

 

Switch power on, close cover. 

Inventory will be cancelled; one2six continues to work in normal operation mode. 

As soon as all cards are drawn and entirely loaded back into the machine, one2six displays the 
result:  

 

Green flashing light indicates the correct amount of cards, corresponding to the 
required amount of the selected game.  
Display shows QUANTITY xxx CARDS/ PRESS FRONT KEY. 
Press one of the two front keys in order to continue the game. 

 

Orange flashing light indicates that there are still cards missing, display shows the 
amount of missing cards. 

 

Red flashing light indicates that too many cards have been detected. Follow display 
instructions. 

To speed up the process, open the cover and manually take out all cards from the black 
wheel.  
Close cover. 
Follow display instructions. 

Содержание one2six
















Отзывы: