13
If the Out-of-Range Indication feature is activated the system will automatically check the range
every 30 minutes after being armed.
1. If the user is within the range, the icon will appear on the LCD screen.
2. If user is out-of-range, the icon will disappear from the LCD screen and the transmitter will
beeps 5 times.
Note: Activating this feature will decrease the life expectancy of the battery.
This security system is equipped with circuitry that will allow the unit to remember its alarm state
if the power is lost and then reconnected.
If your transmitters have been programmed to a second Carbine security system, follow the steps
below.
For LCD Remote Control Transmitter
Second Vehicle Operation: While the icon is displayed on the LCD screen, you
can remote control and communicate with a second vehicle security system.
1. Press and hold and buttons at the same time until one long beep is
heard. Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.
2. Within 5 seconds, press and hold the button until two beeps are heard and
the icon is displayed on the LCD screen indicating second vehicle operation.
3. While the is displayed, press any button on the transmitter to control the second vehicle’s
security system or alarm function (arm/disarm/trunk).
Note: Button functions are the same for the second vehicle as they are for the first vehicle.
Return to First Car Operation
1. Press and hold and buttons at the same time until one long beep is heard.
Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.
2. Within 5 seconds, press and hold the button until one beep is heard and the
icon is not displayed on the LCD screen indicating first vehicle operation.
Second Carbine Security System Operation
Power-On Memory
Out-of-Range Indication
PLUS-5900-UM.qxp 4/30/09 3:12 PM Page 13
