The Security System has a unique optional feature for using your vehicle’s dome light:
1. Upon disarming the vehicles security system, the interior dome light will remain on for 30 seconds to
illuminate the interior.
2. If the security system is triggered, the dome light will flash for the same duration as the parking lights.
Note: Turning “ON” the ignition switch or arm the system will turn off the dome light prior to the 30 second
timer.
Domelight Supervision
If the vehicles door lock system has been connected to the security system, the system will automatically
lock the doors 3 seconds after the ignition switch is turned “ON”, and unlock the doors when ignition key is
turned “OFF”. Note: If a vehicle door is open, the doors will not lock.
Press and hold the button for 1.5 seconds to activate the trunk release (Channel 3 output) and/or any
other devices connected.
Press the
- buttons together to activate the Channel 4 output. Channel 4 is a pulse output.
Note: This function is only available when the Black/White wire is programmed to operate as the
CH #4 output.
Ignition Key Controlled Door Lock/Un-Lock
Channel #3 Trunk Release Output
Channel #4 Output
7
RF valet mode provides the same functions as manual valet mode but allows you to enter and exit the valet
mode using the remote transmitter. When the system is in Valet Mode, all alarm functions and remote start
functions are off. However, the remote panic feature and remote door locks remain operational. To enter/exit
the RF Valet Mode, repeat the following procedures.
Enter Valet Mode
1. In disarmed mode, open the drivers door.
2. Push and hold the and transmitter buttons until the door locks cycle “Lock then Unlock”.
The LED will flash every 5 seconds to indicate that the unit is in the Valet Mode. When the
ignition key is on, the LED will be on solid.
Exit Valet Mode
1. In disarmed mode, open the drivers door.
2. Push and hold the and transmitter buttons until the door locks cycle “Lock then Unlock”. The LED
will stop flashing every 5 seconds to indicate that the unit is out of the Valet Mode.
Valet Mode by Remote
Siren/Horn
LED
Doors
Starter
Dome Light
1. Arming
1 or 3 Chirps
1 Flash
Slow Flash
Locking
Disabled
(Option)
2. Disarming
2 or 4 Chirps 2 or 3 Flashes
Unlocking
Turns on for
30 Seconds
3. Trigger
Alarming
Flashes
Slow Flash
Disabled
(Option)
Flashes
4. Panic
Alarming
Flashes
Flashes
5. Car
Jacking
Alarming
Flashes
Disabled
(Option)
Flashes
6. Car
Locator
2,3,6 Chirps
3,6 Flashes
System Characteristics
Parking
Light
Silent Arming/Disarming
Press the transmitter and button at the same time to arm or disarm your security system. No chirp
sound will be heard. The arm/disarm confirmation will be through the vehicle’s parking lights only.
Remote All Sensor Bypass
Press the button on the transmitter two times within 3 seconds. This will arm the security system and
bypass the internal shock sensor and any optional external sensor. The system will chirp one additional time
to confirm the sensor Bypass Mode was activated. The sensor bypass feature is programmed to activate for
one arming cycle only. The security system will return to normal operation during the next arming cycle.
Silent Alarm Function
Press the button first, within 3 seconds press the button to arm the system and activate the hidden
alarm function. The security system will arm, but the siren / horn will be silenced even if the sensor is
triggered in the armed status.
1. Press the button on the transmitter.
2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming if the door locks have been connected the security system.
Door Ajar Warning
Upon arming, if the siren sounds a second single chirp, then you have left a door, trunk, or hood lid ajar.
Manual Lock/Arm
4
