7. INSTALLATION INTO PATCH DOOR KIT
T h e N e x t G e n e r a t i o n i n L o c k i n g
6. INSTALLATION OF THE MORTICE LOCK WITH SAVER PLATE ONTO TIMBER DOORS -
continued from last page
6D
Insert saver plate into lock
and secure with
2x M4x16mm CSK Screws.
Secure lock to timber door with
2x ST4.2x30 CSK Screw.
6F
Complete installation with
CFB-OCEP
Carbine Oval Cylinder
Rectangular Escutcheon.
6E
Test lock operation.
*If required, remove lock and fit bolt packers
Refer to CLS-A02 - Flip Bolt Latching Strike -
Timber Face Plate Kit
installation instructions for sliding timber door
strike installation (if required).
7B
Unfasten designated
screws and remove both
double mount adaptors.
7A
Supplied configuration.
7C
Insert single mount
adaptors into main lock.
7D
Fasten screws tightly
back into designated position
and the lock is in its
alternative configuration.
Distributed in Australia by
LOCK AND KEY a division on the
DAVCOR GROUP PTY LTD ABN 95 003 562 598
This product has been manufactured in Taiwan
to Lock and Key Company specifications
This product is guaranteed to be free from defects in materials and
workmanship for a period of one (1) year from the date of original
purchase. This warranty is for replacement of product only and Lock
and Key Company does not accept responsibility for any direct or
consequential damage caused by this product or its use. This warranty
does not cover damage
that results from faulty installation or usage,
alteration or modification of the product or tarnishing of the finish
including colour change due to weather, salt or chemical. Should this
product not perform satisfactorily in its intended application, return it
to place of purchase for replacement.
LOCK & KEY
Phone:
1300 652 692
Web:
www.locknkey.com.au
Web:
www. daveweb.com.au
NOTE
Please dispose of plastic
bags and other packaging
in a thoughtful manner
WARNING
Please keep contents
away from small children.
Suffocation Hazard.
Special Notes:
For installation together with CLS-FAB - Flip Bolt Latching Strike, please refer to installation instructions provided with CLS-FAB.
For installation together with CFB-CSL - Concealed Short Lever, please refer to nstallation instructions provided with CFB-CLS.
For installation together with CFB-EH - Egress Handle, please refer to installation instructions provided with CFB-EH.
For installation together with CFB-OES - Oval Escape Turn, please refer to installation instructions provided with CFB-OES.
For installation together with CFB-OTS - Oval Turn Snib, please refer to installation instructions provided with CFB-OTS.
For installation together with CFB-OCEP - Oval Cylinder Rectangular Escutcheon, please refer to installation instructions provided with CFB-OCEP.
CFB-HB
- Installation Instructions Revision 2 - 14th March 2019
