6
Lock/ Arm
- Press and
release
the button to arm the security system
and lock the doors. The parking lights will flash
one
time.
(door lock control must be installed)
Unlock/ Disarm
- Press and
release
the button to disarm the security
system and unlock the doors. The parking lights will flash
two
times. (door lock control must be installed)
Silent Arm/ Disarm
Quickly press and release the
button before pressing the
or button to initiate silent mode. The system will lock or unlock
without arming or disarming chirps.
Note:
If the system had previously been triggered, the tamper
warning chirps will always sound upon disarm.
Disarm without the Remote Control
Your CARBINE system has an override mode that allows you to
disarm your system in the event that you have lost or damaged
your remote controller.
- While the alarm is sounding, turn the ignition key to On,
then press and release the valet switch button. This will
disarm the system.
Note:
If your system was installed and programmed to “Automati-
cally Arm”, the system should be placed into “Valet Mode”
to prevent it from become re-armed until you can correct
the issue with your remote control.
