7
Left – 4 screws in 4 corners Right – please note router edge & clamp
5. ASSEMBLY TENONING JIG / BRACKET TO SLIDING
BRACKET –
Fasten tightly lock bar to tenoning bracket and then
attach to sliding bracket. Be sure to put bearing on trail of fence top.
6. SPECIAL FEATURES AND OPERTIONAL APPLICATIONS
6.1
Fence can move back and forth, traveling 204mm (8 inches) to rear
fence & 230mm to front table edge.
204mm (8 inch) to rear fence
230mm (9 inch) to table edge
(Measuring scale on right side of table edge)
6.2 Design of tenoning jig for working vertically or horizontally.
6.3.
Tenoning jig axial slide with fence back and forth moving can work
for dovetail tenoning and various tenoning grooves and heads.
(Actual application examples in pictures for reference.)
Be sure bearing on trail of fence top.
Very easy design to install, setup or
remove for other operational applications
