CARBATEC.C OM.AU
15
CDC-850P
Fig. B2
Fig. B1
ASSEMBLY
A
B
!
The machine is heavy.
DO NOT over-exert yourself while assembling
the machine. Two or three people are required
to safely assemble it.
To ensure the assembly process goes smoothly,
first clean any parts that are covered or coated in
heavy-duty rust preventative (if applicable).
B.
INSTALLING THE MAIN
BRACKET
1.
Install the wheels to the base by using
the hexagon socket head bolt M6x15
and flat washers Ø6.
Fig. B1A
2.
Insert the end cap into the four sides of
the base.
Fig. B1B
3.
Fix the support bracket to the base by
using the hexagon socket head bolt
M6x15 and washer Ø6. Note the bends
facing inwards.
Fig. B1C
4.
Attach the handle to the bracket by
using hexagon socket head cap bolt
M8x40, washer Ø8 and nut M8.
Fig. B2
C
