FOR TEC HNICAL SUPPOR T CALL
1800 658 111
20
CDC-650P
A
F
B
G
C
H
D
I
E
J
A.
Blast gate
B.
Elbow
C.
Adaptor
D.
Connector
E.
Connector
F.
Grounding Kit
G.
Flexible hose
H.
Hose clamp
I.
Bag clamp
J.
Dust bag
I.
OPTIONAL ACCESSORIES
ASSEMBLY
H.
MACHINE TESTING
Once assembly is complete, test run the machine to ensure it is properly connected to power
and safety components are functioning correctly. If you find an unusual problem during
the test run, immediately stop the machine, disconnect it from power, and fix the problem
BEFORE operating the machine again.
DO NOT start machine until all preceding setup instructions have been performed.
Operating an improperly set up machine may result in malfunction or unexpected results
that can lead to serious injury, death, or machine/property damage.
1.
Clear all setup tools away from machine.
2.
Lock all swivel casters on base stand and dust collection drum.
3.
Connect machine to the cyclone dust extractor or place covers over inlet adapter ports.
DO NOT operate the machine without first connecting it to a dust-collection system or
covering an inlet adapter port. Otherwise, the lack of airflow resistance will cause the
motor to operate at full amperage load, which could trip your circuit breaker or blow a fuse.
4.
Connect machine to power.
5.
Standing away from intake port, press button “ON” to turn machine on.
6.
Verify motor starts up and runs smoothly without any problems or unusual noises.
7.
Press “OFF” button to turn machine OFF.
More accessories available, please contact your local Carbatec store
for more information.
