Version 25.01.2012
USB-E65
Pa
ge
3
1.2.
Check compatibility of vehicle and accessories
1.3.
Setting the dip switches of the CAN-box TV-436
1.4.
Setting the dip switches of the USB-box USBC-M536
The default dip switch settings of the USB-box
need to be changed ONLY if a rear-view camera is
or shall be connected or if the AV-input of the
usbLOGiC shall be deactivated. The dip switches are
located
inside
the USB-box. For changes it is
necessary to open the box. Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
1.4.1.
Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected or a factory
rear-view camera is connected, in order for the usbLOGiC to
automatically switch to its camera input, when reverse is engaged
set dip2 = ON (up).
Note:
Automatic switching works only from usbLOGiC mode.
Dip switches
of USB-box
Requirements
Vehicle
7series (E65/E66)
Navigation
Navigation system
Professional
E65 (older 1/2-button iDrive
or CIC (newer 8-button iDrive) with 8.8” monitor
Limitations
factory-TV-tuner
Must NOT be installed. If uninstalled, optical ring must be closed.
factory DVD-changer
After-market rear-view camera cannot be connected to
or factory nightvision
the usbLOGiC interface.
factory
Additional interface VL-RGB02-R is necessary
rear-seat-entertainment
After-market rear-view cam
Only works from usbLOGiC mode, not from OEM.
USB-port
Only for media which work with power supply by ONE single USB
connector
All vehicles
dip 1 ON, dip 2 OFF, dip 3 OFF
