Version 22.12.2011
USB-NTG25
Pa
ge
11
4.
Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is activated is by pressing the “hang up”
button on the steering-wheel for more than 3 seconds. Repeat action
to deactivate the video in motion function.
Note:
As long as the video-in-motion function is activated, the
navigation
of the command
will NOT be working
!
4.2.
Selecting the usbLOGiC as current AV-source
Push the
OK
button of the Comand and then select
TV
to choose the usbLOGiC as current
AV-source.
4.3.
Switching between internal USB and AV-input
After selecting the usbLOGiC as current AV-source, push “0”-button to switch from internal
DVB-T to AV-input. Repeat to switch back to internal USB.
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”), it is not
possible to switch to the usbLOGiC’s AV-input.
4.4.
Assigning device control for connected AV-source
After selecting the usbLOGiC as current
AV-source, push “
*
”
-button. The OSD will
show “Channel
[][]
Prog
[][]
”. Now enter the
device-related IR-code as described in device
control table (appendix A), followed by
number “12” and push “OK”-button to
confirm the assignment.
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”), it is not
necessary, nor possible to assign device controls.
