Version 17.03.2021
RL-PCM3-2-TF
Pag
e
3
1.3.
Setting the DIP switches of the interface-box RLC-M40-2
Vehicle/ navigation
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6
PCM 3 with video-in-motion activated
ON
ON
OFF
OFF
OFF
OFF
PCM 3 with video-in-motion deactivated
OFF
ON
OFF
OFF
OFF
OFF
PCM 3.1 with video-in-motion activated
ON
ON
OFF
OFF
OFF
ON
PCM 3.1 with video-in-motion deactivated OFF
ON
OFF
OFF
OFF
ON
Note
: DIP switch functions of the interface-box RLC-M40-2
DIP 1 – Activation video in motion
DIP 2 – OEM- or aftermarket- rear view camera existing
DIP 3 – Coding rear-view camera in conjunction with DIP 5
DIP 4 – Coding ParkAssist in conjunction with DIP 5 (only PCM3.1, PCM3 no function)
DIP 5 – Camera / ParkAssist coding (DIP switch for 5 sec. in ON position)
DIP 6 – CAN-bus termination
1.4.
Pin-assignments
Pin-assignment factory connector
No liability for vehicle wire colors and pin definition!
Possible changes by the vehicle manufacturer. The given
information must be verified by the installer.
Pin-assignment of the interface-box RLC-M40-2 (Molex 12pin)
Cable colour
Pin-No. Assignment
●
Yellow
Pin 6
CAN-HIGH – connection to the head-unit
●
Blue
Pin 5
CAN-LOW – connection to the head-unit
●
● Yellow/Black Pin 12
CAN-HIGH – connection to the vehicle
●
● Blue/Black
Pin 11
CAN-LOW – connection to the vehicle
●
Red
Pin 1
+12V permanent
● Black
Pin 7
Ground
●
Green
Pin 2
+12V rear view camera output (max. 1A)
●
White
Pin 3
+12V front camera output (max. 1A)
●
Blue
Pin 4
No function
●
Yellow
Pin 8
Rear view camera video signal input
●
Yellow
Pin 10
Front camera video signal input
●
Transparent
Pin 9
Camera video signal output
Cable colour
Assignment Pin No.
●
Red
+12V battery
Pin 15
●
Black
Ground
Pin 12
●
●
Orange/brown
CAN-low
Pin 9
●
●
Orange/purple CAN-high
Pin 11
