Version 13.02.2013
DVB-E65-TV
Pa
ge
3
1.2.
Check compatibility of vehicle and accessories
1.3.
Setting the dip switches of the CAN-box TV-436
1.4.
Setting the dip switches of the tuner-box
The default dip switch settings of the tuner-box
need to be changed ONLY if a rear-view camera is
or shall be connected or if the AV of the dvbLOGiC
shall be deactivated. The dip switches are located
inside
the tuner-box. For changes it is necessary
to open the box. Default settings are:
dip1 = ON, dip2 = OFF, dip3 = OFF
Requirements
Vehicle
7series (E65/E66)
Navigation
Navigation system
Professional
E65 (older 1/2-button iDrive
or CIC (newer 8-button iDrive) with 8.8” monitor
Limitations
factory-TV-tuner
Must NOT be installed.
factory DVD-changer
After-market rear-view camera cannot be connected to
or factory nightvision
the dvbLOGiC interface.
Teletext
Teletext of the dvbLOGiC can only be used with the
optionally available DVB-IRSET remote control set.
factory
Additional interface VL-RGB02-R is necessary
rear-seat-entertainment
After-market rear-view cam
Only works from dvbLOGiC mode, not from OEM.
Factory PDC
If an after-market rear-view camera should be connected by the
dvbLOGiC the visual PDC display must be deactivated
occasionally or permanently for camera picture.
All vehicles
dip 1 ON, dip 2 OFF, dip 3 OFF
