Version 25.09.2017
DT3-E65-TV
Pag
e
14
3.
Operation
3.1.
Activation of the video-in-motion function
The video-in-motion function is permanently active without disturbing the navigation
performance.
3.2.
Selecting the dvbLOGiC as current AV-source
In the vehicle’s main menu, select
Infotainment
and then
TV
by iDrive to choose the
dvbLOGiC as current AV-source.
3.3.
Assigning device control for connected AV-source
After selecting the dvbLOGiC as current AV
source, push iDrive knob to open the
dvbLOGiC control menu. Select control
levels setup “AV: RCxx” and assign related
IR-code as described in device control
table.
Note:
If the AV-input is deactivated (see chapter 1.4.2.), the menu items “AV” and “AV:
RCxx” will not be available.
3.4.
Switching to internal DVB-T, AV-source or after-market rear-view camera
In the dvbLOGiC control menu, choose TV to enter internal DVB-T tuner mode, AV to enter
AV-input mode (not available if AV-input is deactivated, see chapter 1.4.2) or REAR CAM to
switch to the dvbLOGiC after-market rear-view camera-input (even if the automatic
switching to the camera input is disabled, see chapter 1.4.1.). After selection the menu will
close automatically and switch to the selected source. The iDrive knob, some multi-function-
steering wheel buttons (MFSW) and some navigation buttons (HU) are now available for
remote functions (see assignment table for iDrive below).
By pressing the iDrive-MENU-button, the system returns to the factory iDrive functions. By
pressing the iDrive knob again, the dvbLOGiC control menu will be re-entered.
