Version 25.09.2017
DT3-CXC-TV1
Pag
e
12
2.6.4.
After-market rear-seat-entertainment
Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of harness C3C-AVIR.
Note:
As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
3.
Operation
3.1.
Activation of the video-in-motion function
On vehicles with CIC (8-button iDrive) the video-in-motion function is permanently active
without disturbing the navigation performance.
On vehicles with CCC or E65 navigation (1 or 2 button iDrive) press the menu-button or the
iDrive wheel for about 3 seconds while in
main menu.
Alternatively it is possible to set dip-
switch 1 of the CAN box TV-436 to ON. But then the navigation performance is disturbed on
the first few kilometres of driving.
3.2.
Selecting the dvbLOGiC as current AV-source
In the vehicle’s main menu, select
Infotainment
and then
TV
by iDrive to choose the
dvbLOGiC as current AV-source.
