Version 01.09.2011
C1-C25
Pa
ge
8
4.3.
Assigning device control
After selecting the c.LOGiC as current AV source, longpress
the number “
1
”-button or shortpress the “
RET
”-button.
The display in the instruments will show “TV 1” and
“RC01”. Turn right knob until the device-related IR-code as
described in device control table (appendix A) is reached.
Push right knob to confirm the assignment.
If the vehicle has no MFD display in the instrument panel, you must count the notches when
turning the knob (to the right +1, to the left -1). At the same time, remember that the
starting point is channel RC01 (the first notch to the right is then already RC02).
4.4.
Button assignment table
The button assignment table shows which functions of the connected devices can be
executed by Comand buttons. Once the AV-input is activated, the Comand button in the left
column will execute the function described in the corresponding device column. The
function description equals the remote control buttons of the optional c.LOGiC remote
control or the additional device. On the additional device the writing may vary (e.g. AV
instead of Source).
