Version 20.09.2017
Ci-C2-E65-TV
Pa
ge
11
2.3.4.
Factory nightvision, factory DVD-changer, factory rear-view camera
On vehicles with factory nightvision, factory DVD-changer or factory rear-view camera, pin
out the video-signal and video-signal ground from the white 18pin AMP connector of the
vehicles harness (rear of navigation computer) and connect them by male RCA-connector to
the R-CAM IN of tuner-box.
Navi
Video-signal
Video-signal ground
E65
Pin 1 (yellow-black)
Pin 10 (green)
The factory component will work as before.
3.
Operation
3.1.
Activation of the video-in-motion function
Tthe video-in-motion function is permanently active without disturbing the navigation
performance.
3.2.
Selecting the c.LOGiC as current AV-source
In the vehicle’s main menu, select
Infotainment
and then
TV
by iDrive to choose the c.LOGiC
as current AV-source.
3.3.
Assigning device controls
After selecting the c.LOGiC as current AV source, push
iDrive knob to open the c.LOGiC control menu. Select
control levels setup “DEV1: RCxx” (“DEV2:RCxx”) and
assign related IR-code for AV1 (AV2) as described in
device control table.
Note:
The IR-control channel DEVV1 is preset to RC-Code 41 compatible DVB-T tuners and
DEV2 is preset to RC-Code 09 for the usbLiNK.
If the AV2 is deactivated (see chapter Deactivating c.LOGiC AV2-input), the menu items “USE
DEV2” and “DEV2: RCxx” will not be available.
