Version 19.10.2012
C2-MMi2G-x
P
age
8
3.3.
Connecting optical ring
Remove the black MOST®-connector which contains the optical leads from the rear of
the factory CD-changer. Remove the optical insert from the black connector.
Remove the vehicle harness’ optical output lead (see arrows on MOST®-connector).
With the included optical bridge, connect the removed vehicle harness’ optical
output lead to the optical output lead of the interface’s optical ring (see arrows on
MOST®-connector).
Plug the optical input lead of the interface’s optical ring into the free connector of
the male MOST®-connector on the rear side of the factory CD-changer.
Plug male MOST®-connector of interface’s optical ring into female MOST®-connector
of the video-interface.
3.4.
Connecting peripheral devices
It is possible to connect 2 after-market AV-sources, an after-market rear-view camera and an
after-market navigation to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run to detect
incompatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer is always the possibility of incompatibility.
