Version 22.03.2011
C2-CCC/C2-CIC
Pa
ge
3
1.3.
Setting the dip switches of the CAN-box TV-436
1.4.
Setting the dip switches of the MOST®-box C2C-M336
The default dip switch settings of the MOST®-box
need to be changes ONLY if an after-market
rear-view camera shall be connected or if AV2 of
the c.LOGiC shall be deactivated. The dip
switches are located
inside
the MOST®-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = OFF
1.4.1.
Rear-view camera
If a rear-view camera shall be or is connected, in order for the
c.LOGiC to automatically switch to its camera input,
set dip2 = ON (up).
Note:
Automatic switching to after-market rear-view camera works
only from interface mode.
1.4.2.
Deactivating c.LOGiC AV2 input
If only one AV-source shall be connected to the c.LOGiC, we recommend
to disable AV2, to avoid customers switching by mistake to black/no
picture of AV2. In order to disable the AV2 input of the c.LOGiC,
set dip1 = OFF (down).
Note:
Additional measures relating to the deactivation of AV2 are described in chapter
Assigning device control .
Vehicles with CIC
dip 1 ON, dip 2 OFF, dip 3 OFF
Vehicles with CCC
dip 1 OFF, dip 2 OFF, dip 3 OFF
Dip switches
of MOST®-box
