CARANDINI SWE Скачать руководство пользователя страница 3

Страница: 3 / 3

2. ASSEMBLING SWD LUMINARIES ON SWE PROFILES

Carefully take out the SWD luminaries form the box and place them on a stable surface.

Locate the socket and the safety hook on the SWE profile; they will be used to connect SWD luminaries with SWE profiles [pic. 1]

Fasten the SWD safety wire to the SWE safety hook [pic. 2]

Place the SWD luminary on the already installed SWE profile so that the electrical connector could line up with SWE socket [pic. 3]

Join SWD fixture with SWE profile by connecting the socket and the connector. Press them slightly together [pic. 4]

Mount the covering shield by pressing it gently until it clicks into a place [pic. 5]

SOCKET

SAFETY HOOK

pic. 1

pic. 3

pic. 2

pic. 4

pic. 5

C. & G CARANDINI, S.A.U.

Carrer Verneda, 66-70 E-08107 Martorelles (Barcelona)

Tel: 93 317 40 08 - Fax: 93 317 18 90 -

www.carandini.com

Содержание SWE

Страница 1: ...shield from the side where the profiles will be joined together pic 1 4 Remove the top cover pic 2 5 Place both SWE profiles so the A profile will be aligned to the B A opposite B pic 3 6 Place the m...

Страница 2: ...profiles together pic 7 10 Place the buckle ring A profile on the pin B profile pic 8 11 Tighten the clamp by pressing it down both profiles should be joined now and connected with each other pic 9 1...

Страница 3: ...ace the SWD luminary on the already installed SWE profile so that the electrical connector could line up with SWE socket pic 3 5 Join SWD fixture with SWE profile by connecting the socket and the conn...