9
•CAN cable connection
Find a bunch of
cables like above.
Take out the black cover
from the connector.
Connect the
provided CAN IN/OUR
cable to the cable.
Disconnect the red
marked cable.
Assemble the black
cover to the provided
CAN IN/OUT cable’s
connector.
Plug in the provided cable
to the red marked spot.
※
You may find cables as below behind of car command.
•LCD cable connection
Disconnect the OE LCD
cable from the backside of
command and connect it
to “LVDS IN” on sub-board.
Connect the provided LCD
cable to “LVDS OUT” on
sub-board and then
connect the other side to
where you disconnect the
OE LCD cable from the
command box.
OE LCD cable
Provided LCD cable
※
When provided LCD cable blocks the other ports of command
Disconnect OE LCD cable from the monitor and connect it to
LVDS In on subboard
The provided LCD cable shall be connected from Monitor to
LVDS out on subboard
Car-Solutions.com
www.car-solutions.com
