6
5. Diagram
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MIC
U
N
L
O
C
K
L
O
C
K
F
ue
l
C
on
t
ro
l
(r
el
a
y)
ACC
GND 12V+
J2
J3
J1
SOS
P
K
E
/
S
G
*
C
A
N
L
o
w
*
C
A
N
H
i
g
h
D
oo
r
T
ri
g
ge
r
*
S
t
e
e
r
i
n
g
DEBUG
30
87
87
a
85
86
Original
Fuel Circuit
12V+
COM
(To port 5)
Relay
*Only available for CMSE-V2/V2L
J3: For engineer debugging purpose only.
Port 3: Only enable when working with Push Start System.
Port 4: For specific cars door trigger alarm purpose only, Disable as default.
Port 12: For specific cars Can-Bus control purpose only, Disable as default.
Port 13: For specific cars Can-Bus control purpose only, Disable as default.
Port 14: For specific cars Auto-Security purpose only, Disable as default.
To realize basic GPS functions, the minimal connections are required:
Port 11 (ACC)
Port 15 (GND)
Port 16 (12V+)
No need to connect Port 4, 6, 7, 12, 13, 14 if working with Push Start System.
6. Warm Suggestion
1. The product must be installed by professional vehicle technician. Ensure the
power voltage is less than 16V before installation. If it is higher than 16V (for
example truck-24V), please ask your dealer to make some tuning.
2. The main unit should be installed at hidden position which avoids water, far
away from heat source and electric device.
3. GPS antenna should be fixed to face sky without metallic shield. GSM antenna
should be fixed far away from main unit without metallic shield.
4. Main cable connection: Make them hidden and fixed firmly to avoid man-made
damage. Test them by multimeter after installation.
5. Initialization: After powered 30 seconds, the GSM works, configure it by SMS.
6. Do not forget to configure the APN parameter if you want to access internet and
Cloud-Service (APP, Website, SMS Street information, etc.)
