Car Keys Express REPLACEMENT REMOTE, Руководство пользователя, Страница: 6 / 24

USER GUIDE
6
8. After hearing this short tune, press and hold both Lock and Unlock
on your new remote for approximately 30 seconds.
9. Repeat step 8 for each additional remote to be programmed.
10. After all remotes have been added, turn the key to the Off position
and unplug the EZ Installer.
11. Press buttons on each remote to test they were properly
programmed to the vehicle.*
*Some vehicles may need to have the engine started and stopped, and
the driver's door opened and closed before the remotes will work.
OBP (ON BOARD PROGRAMMING)
These vehicles do not require the EZ Installer device to PAIR your new remote.
When the instructions below tell you to “turn the ignition to the ON
position,” reference the picture below for how far to turn the key. DO
NOT START THE VEHICLE.
OBP A
1. Close doors and insert key into ignition (do not turn key on).
2. Press and hold the power Unlock switch on the driver's door. Keep
the switch held until step 8 below.
3. Complete the next 4 steps quickly.
4. Turn the ignition to the ON position.
5. Turn the ignition to the OFF position.
6. Turn the ignition to the ON position.
7. Turn the ignition to the OFF position.
8. Release the power Unlock switch. The vehicle should lock and
unlock the doors automatically.
9. Hold both Lock and Unlock buttons down on your new remote
GM IGNITION POSITIONS