Version 20.09.2017
CI-TF-C20
Pa
ge
3
Pin-assignment of the CAN-Box TV-500 (Molex 8pin)
Cable colour
Pin-No. Assignment
●
Yellow
Pin 4
CAN-HIGH – connection to the head-unit
●
Blue
Pin 3
CAN-LOW – connection to the head-unit
●
● Yellow/Black Pin 8
CAN-HIGH – connection to the vehicle
●
● Blue/Black
Pin 7
CAN-LOW – connection to the vehicle
●
Red
Pin 1
+12V permanent
● Black
Pin 5
Ground
●
Green
Pin 6
Activation of the video-in-motion function
(+12V = TV-free activated)
●
White
Pin 2
Trigger output (+12V DC 500mA)
2.
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
-
Remove the Comand from the center console
-
Unplug the female 18pin AMP connector of the
vehicle harness from the comand
-
Change the sleeves of the female 18pin AMP
connector from the vehicle harness (coloured) and
the harness TV-ME20 (black)
-
Connect TV-ME20 to 18pin AMP and connect 8pin Power ISO connection between
Comand and vehicle harness