Version 17.02.2020
HW GD(V97)
CI-UCON5N
P
a
g
e
10
Clip out the original 40pin ribbon cable which is connected at the head-unit’s ribbon
cable base and connect it to the lower free ribbon cable base
“Lcd OUT”
of the
daughter PCB. (heed the following warning notes!)
Note: Due to the very short length of the ribbon cable, there’s only limited space
for mounting available.
Connect the daughter PCB’s pre-assembeled 40pin ribbon cable to the previously
become free ribbon cable base of the head-unit mainboard. (heed the following
warning notes!).
After a check of the perfect ribbon cable connection, in reverse order fold back and
clip in the head-unit housing to the head-unit control panel and fix the exchange
housing base plate to the head-unit’s housing.
