Version 26.01.2022
TF-U500
Pa
ge
37
Vehicles with Mercedes Benz MBUX NTG 6
Place of installation is at the back side of the
navigation unit.
A-class: On the A-pillar on the driver's side
GLE, GLS: Below passenger seat
Sprinter: Behind the factory monitor
Vehicle/ navigation
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6
Video-in-motion permanent
ON
OFF
OFF
OFF
OFF
ON
Video-in-motion selective*
OFF
OFF
OFF
OFF
OFF
ON
Video-in-motion selective via hang up button
With DIP 1 set to OFF, a long press (3 sec.) on the steering wheel
"hang up" button is used to activate / deactivate the video-in-motion
function.
(After ACC is switched off, the video-in-motion function will be
automatically deactivated)
Pin-assignment vehicle connector – 26pin version
No liability for vehicle wire colors and pin definition! Possible changes by the vehicle
manufacturer. The given information must be verified by the installer.
The video-in-motion function is activated permanently without disturbing the navigation
performance.
Cable colour
Assignment
●
Red
+12Volt Permanent - Pin14
●
Brown
Ground - Pin 1
●
●
Purple/White
CAN HIGH - Pin 7
●
Purple
CAN LOW - Pin 20
Requirements
Vehicle
Mercedes Benz A-class (W177), Sprinter (W907), GLE (C167),
GLS (X167) und more types.
Navigation
MBUX NTG 6
Limitations
MBUX Augmented Reality
While the video-in-motion function is active, it is not possible to
use the camera traffic light display function!
