Version 31.01.2019
HW:CAM-GD (V94)
CI-RL3-NAC
P
a
g
e
7
1.5.1.
Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed when switching through the interface’s video
sources. It`s recommended to enable only the required inputs, for the disabled will be
skipped when switching through the video interfaces inputs.
1.5.2.
Rear-view camera setting (dip 5)
If set to
OFF
, the interface switches to factory LVDS picture while the reverse gear is engaged
to display a factory rear-view camera or a factory optical park system picture.
If set to
ON
, the interface switches to its rear-view camera input “Camera-IN” while the
reverse gear is engaged.
Note:
Dip 1, 4, 6 and7 are out of function and have to be set to
OFF
.
1.5.3.
Choosing the corresponding head unit version (dip8)
If set to
ON
, the video interface will communicate with the NAC low-version head unit.
If set to
OFF
, the high version of the head unit will be adjusted.
Note:
Dip 1,4,6 and7 are out of function and have to be set to
OFF
.
1.6.
Settings of the 4 Dip switches (CAN function - red)
Dip position down is
ON
and position up is
OFF
.
Navigation / Sy5tem
Dip 1
Dip 2
Dip 3
Dip 4
NAC infotainments
OFF
OFF
OFF
OFF
Set all 4 dips to OFF.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
