Version 29.01.2020
HW: CAM (V97)/ (V52)GD
CI-RL3-MBN51
P
a
g
e
16
2.8 Picture settings and guide lines
The picture settings are adjustable by the 3 push-buttons on the video-interface. Press the
MENU button to open the OSD settings menu or to switch to the next menu item. Press UP
and DOWN to change the selected value. The buttons are placed inside in the housing to
avoid accidental changes during or after the installation. Picture settings must be done
separately for Video1, Video 2 and rear-view camera while the corresponding input is
selected and visible on the monitor.
Note:
The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
IR-AV1 (out of function)
IR-AV2 (out of function)
Guide-L
Setting Guide lines
UI-CNTRL
PDC function on/off
(ALLON+PDCON=PDC on, ALLOFF=PDC off, RETON=No function)
Guide-CNTRL
Guide lines on/off
H-SIZE (horizontal) picture adjustment
V-SIZE (vertical)
for rear-view camera
Note:
If the vehicle’s CAN communication does not support the video interface, the guide-
lines cannot be used, even if they’re once shown with the first operation!
