Version 03.07.2020
HW CAM(V98)/(V16)
CI-RL3-LR16-8/10
P
a
g
e
13
2.4.
Analogue power supply for the video interface
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video interface.
If, after connecting the PNP harness, no interface LED lightens up while the ignition is
turned on, the single red wire
ACC-out (max 3A)
and the purple coloured wire
Manual ACC
of the 12pin interface cable both have to be connected additionately to
S-contact
terminal 86s +12V
(e.g. glove compartment illumination).
