Operation Guide
Issue V1.0 (2019-03-29)
11
Step 4
Press the
LEFT
or
RIGHT
button to select ON or OFF, and press the
UP
or
DOWN
button
to set position and area of privacy area. Press the
LEFT
or
RIGHT
button to adjust value of
parameters. There are four areas can be set.
Step 5
Press the
UP
or
DOWN
button to select
COLOR
, press the
LEFT
or
RIGHT
button to
select RED, GREEN or BLUE.
Step 6
Press the
UP
or
DOWN
button to select
TRANSPARENCY
, press the
LEFT
or
RIGHT
button to select ON or OFF..
Step 7
Press the
UP
or
DOWN
button to select
RETURN
and press the
SET
return to the OSD
FUNC interface.
Step 8
Press the
UP
or
DOWN
button to select
MOTION
, the method of setting motion is the same
as privacy settings, as shown in Figure 2-10. Please refer to the setup steps above.
Figure 2-10
Motion interface
Step 9
Press the
UP
or
DOWN
button to select
RETURN
and press the
SET
return to the OSD
main menu interface.
2.8 RESET
Press the
UP
or
DOWN
button to select
RESET
, and press the
SET
button to reset the camera OSD
parameter.
2.9 SAVE-EXIT
Press the
UP
or
DOWN
button to select
SAVE-EXIT
, and press the
SET
button to save the OSD
settings and return to the camera's real-time video interface.
