Captron CHT5, Оригинальная инструкция по эксплуатации

Страница: 10 / 15

10/15 1.2 CHT5 / CHT51
► Insert the supplied O-ring into
the groove (D) on the mounting
flange.
► Remove the protective film from
the mounting flange (C).
► Align the mounting flange (C)
to the hole (B), place it on the
profile of the glass frame (A) and
press on firmly.
7.1.3 Assembling the SENSORswitch
► Connect the SENSORswitch
electrically according to the
connection plan.
► Align the sensor element as
shown in the figure, paying
attention to the direction of the
symbol. The recesses on the
plug (A) must be facing the pane
of glass.
► Press the sensor element into
the mounting flange and check
whether the sensor element is
flat on the pane of glass.
► Lay the fastening cable between
the ridges (B).