
13
LIGHTING INSTRUCTIONS
Before each use, check all hoses for cracks, nicks, cuts, burns,
or abrasions. If a hose is damaged in any way, do not use your
gas grill before replacing the hose with an authorized part from
the Parts List. Also make sure all gas supply connections are
securely tightened.
Open the gas grill lid.
1.
Open the LP gas cylinder valve SLOWLY 1/2-1/4 of a full
2.
turn.
Push and turn the
3.
control k
nob to position. The
built-in spark ignitor will light the burner automatically.
You may have to push and turn the knob up to 3 or 4
4.
times to light.
If the burner does not light, turn gas off and wait 5
5.
minutes before
trying again or lighting by match.
After the burner is
6.
lit, turn the cylinder valve SLOWLY an
other 1/4 of a turn.
LIGHTING WITH A MATCH
Open the gas grill lid.
1.
Open the LP gas cylinder valve SLOWLY 1/2-1/4 of a full
2.
turn.
Light the match and put lighting stick to burner from the
3.
front door of the grill as shown. Turn the control knob to
the HIGH setting to release gas. The burner should light
immediately.
WARNING
Never lean over the gas grill cooking area while
lighting your gas gill. Keep your face and body
a safe distance (at least 18 inches) from the
burner when lighting your gas grill by match.
Caution: Do Not Touch The Panel When Hot
Содержание DF01
