20
9. Charging your IO HAWK
Step 1: Ensure that the charging port is clean and dry. Make sure that
there is no dust, debris or dirt inside the charging port.
Step 2: Plug the charger into the wall, then connect the cable with the
power supply (100V ~ 240V; 50, 60 Hz), make sure the light on the
charger is lit GREEN.
Step 3: Connect the charging cable into the charging port of the
IO HAWK. The indicator light on the charger should change to RED,
indicating that your IO HAWK is now being charged. When the RED
indicator light on your charger turns to GREEN, then your IO HAWK is
fully charged. A full charge typically occurs within 2-3 hours.
Step 4: Please unplug the charger from your IO HAWK and from the
power outlet.
Important Notes About Charging
•
If the GREEN light on your charger does not turn RED when
you plug it into your IO HAWK, it could mean you have to check
the cables to ensure you have a proper connection; or that your
IO HAWK is already fully charged. Push and hold your power
button next to the charging port to check the status of your
battery in the display.
•
Do not overcharge, as this will affect the life of the battery.
•
The best charging temperatures are between 32°F - 104°F
(0
℃
~40
℃
). Extreme cold and extreme heat will prevent your
battery from charging fully.
•
Make sure to unplug your charger before standing on or
operating your IO HAWK, as this can be very dangerous.
•
Use only the IO HAWK charger that you received in your box.
•
If the IO HAWK is powered on when you enter the plug, the
Battery Indicator will begin blinking, if the IO HAWK is powered