S 8280 /
TMX827H
LONG REACH PRUNER EN
Warning:
Please read this instruction manual carefully before using the instrument and keep it for future use.
A.
SAFETY INSTRUCTIONS
1.
The device is intended exclusively for private and not for commercial use. Only use this device as describe in this
instruction manual.
2.
Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
3.
Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
4.
Hold the long reach pruner with both hands.
5.
The operator as well as any person next to him must take measures to avoid being struck by branches or
cuttings of foliage while using this tool. Wear protective goggles and a helmet.
6.
RISK OF ELECTRIC SHOCK! DANGER: Make sure that a high voltage line, electric cable, etc. are not near
the work area and could be accidentally touched with the pruner.
Never point it in the direction of a high voltage line or an electric cable.
Avoid any contact between the pruner and a high voltage line or an electric cable.
7.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capacities, or by persons lacking in experience or knowledge, unless they are supervised or instructed on the use of
this apparatus by a person responsible for their safety.Children should be supervised to ensure they do not play with
this appliance.
8.
Check that the tool is correctly mounted, that the nut is tight or that the telescopic handle is locked before using the
tool.
9.
Only use the saw blade provided and under no circumstances another blade not provided for this purpose.
10.
Use the tool only when on the ground, use on a roof or a stepladder is not recommended.
11.
Do not try to cut branches with a diameter larger than 1cm with the pruning shears, you may damage it irreversibly.
For larger branches, use the saw provided.
B.
HOW TO USE IT
1)
Installer the saw blade
2)
Lock button
Hold the handle and release the safety cutting lock to unlock the blades.
Always lock it back when you finish to use and before to stock.
3)
Lenght adjustment procedure
Lock
Unlock
Loose the wing nut
Set the saw blade
Tighten the saw blade
wing nut tightly
Ready to use
