R 5034 / MVS03
chamber. Make sure the memory card snaps into place. Return the battery to the chamber (so that
the more exposed tip is pressed against the spring) and slide cover back into place.
If sound alarm, that means polarity isn’t respected, remove the battery and insert it in the other
direction.
2)
Recharging the battery
Connect the smallest end of the USB cable to the port on the back of the radio and the larder end
to the AC adapter. Plug the adapter into a power outlet. Light LED appears on the bottom right
corner.
Thanks to its battery, you can unplug your device for short periods. When the batteries are
charging, a battery icon in the upper right corner of the display will flash. Once fully charged, the
icon will stay steady. When the unit is battery-powered, segments of the battery icon will gradually
decrease from five to one.
Usually, the battery lasts for 4 to 5 hours, after which the device goes to sleep until you plug it in
again using the USB cable and the supplied charger. If the battery is completely discharged, you will
need to make the settings again.
3)
Setting the date and time
Press and hold power button
for more than 5
seconds to turn ON the device.
LCD screen turns ON and shows the seven icons of the
main menu.
Navigate to the CLOCK icon by repeatedly pressing the
“+” and “-“ button until highlighted. Click OK. The clock
showing large digits will appear. Click OK again and a
blue box will be surimposed over the time revealing
fields for Date, Mode and Time.
Press the OK button to navigate through the fileds. To
increase or decrease ahighlighted digit, use the “+” or “-“ button.
With the correct digital showing, press OK to navigate to the next field.
Press ESC button twice when the date and time entry is complete. The date and day of the week
will appear above digital clock display.
Note: the date must be entered in the year/month/day format. The mode can be set for a 12- or
24-hour format. If the former, set the time to AM or PM.
4)
Setting the language
The default language is English. You cannot change the
language.
5)
Restore factory settings
In the main menu, use the "+" or "-" keys to navigate
from one icon to another.
Go to the "SETTING" icon and press "OK", the first line
"Language" will be highlighted. You can not change the
language. Use the "+" or "-" keys to move down the
