Captain 273 4WD Скачать руководство пользователя страница 68

Страница: 68 / 121

OPERATOR MANUAL

CAPTAIN 273 4WD

If the tractor is operated with the safety structure folded down (e.g. to enter a low building) drive with
extreme caution and DO NOT use seat belt.
Fold the safety structure up again as soon as the tractor is operated under normal conditions

4.37

How to drive the tractor

To drive the tractor, you will need to exercise greater effort if the engine is at standstill.

Slow and stop

the tractor with the brake pedals latched together. Tow or push the tractor at moderate speed

4.38 How to safely drive the tractor

Affix the slow moving vehicle card (SMV slow moving Vehicle).

Use the revolving beacon and hazard lights (As per

recommendation in particular countries)

Strictly comply with the laws in force in the country where the

tractor is used.

4.39

Tractor transport

The tractor must be transported with a suitable vehicle. Engage

the parking brake. Firmly fasten the tractor to the transport

vehicle using suitable chains or straps. (Fig.4-19) Use the tow bar

or its supports as rear fixing points for the tractor.

CAUTION: Never hitch or connect chains around the tractor

components as these could be damaged by the chains

themselves or by excessive loads.

The trailer must be provided with the warning signs and lights

required by the local laws in force.

The numbers in the second column refer to the operations described in the following pages. Listed in

chronological order.

Fig 4.19

Содержание 273 4WD


























































































































Результаты поиска

Содержание 273 4WD

Отзывы:

Captain 273 4WD, Руководство оператора, Страница: 68 / 121

Результаты поиска

Содержание 273 4WD

Отзывы: