5.
Before First Use
Clean the milk pitcher, lid, froth enhancer and the disks under running warm
water. Make sure the underside of the milk pitcher is completely dry before
placing on the base.
CAUTION:
Maximum Capacity - FROTHING:
never fill more than 10 oz.
(see FROTH marking on the side of the milk pitcher)
Maximum Capacity - HEATING:
never fill more than 16 oz.
(see HEAT marking on the side of the milk pitcher)
Froth enhancer (disk holder)
Holds frothing or heating disk
in place and enhances mixing
power.
Frothing Disk (whisk)
- Snaps
into froth enhancer for frothing
milk. Can be stored in storage
drawer on front of the base.
Heating Disk (smooth)
- Snaps into froth enhancer for
heating milk without froth. Can be stored in storage
drawer on front of the base.
Using the Frothing Disk
Never fill more than 10 oz. of milk or chocolate milk into the
milk pitcher ("FROTH" marking); otherwise, hot milk could
spill over the milk pitcher onto the heating platform. This
may damage the interior parts of the machine.
Using the Heating Disk
:
Never fill more than 16 oz. of milk or chocolate milk into the
milk pitcher ("HEAT" marking).
Using the froth TEC
™
The froth TEC™ Automatic Milk Frother comes equipped with a glass milk
pitcher with lid, a froth enhancer, one frothing disk, one heating disk and the
base unit. One of the disks is installed onto the froth enhancer inside the milk
pitcher. The other disk is stored in the drawer that slides out of the front of the
base of the appliance.
