background image

15

Acid (vinegar) taste in espresso coffee. 

• Did not fully rinse the system after descaling. 

   

See chapter 15 for detailed instructions on rinsing the system after descaling.

• The coffee is not fresh or of high quality. 

   

Grind fresh whole bean coffee right before brewing. After opening, store 

   

whole beans in a dark, air-tight container to maintain freshness. Use beans 

   

within 1 week.

Espresso not hot enough.
• Prewarm cups and heating system. 

   

Prewarm cups with hot water or on the cup warming tray. Purge brew head and 

   

portafilter immediately before brewing. Dry portafilter and sieve before filling with 

   

ground coffee. See chapter 7.

Uneven cup filling. 

• Outlet in sieve or portafilter is blocked. 

   

Remove sieve from portafilter. Clean with stiff brush. Clean portafilter.

• Uneven dosing of ground coffee into sieve. 

   

Evenly distribute the finely ground coffee into the sieve.

Loud pump noise/no water from brew head. 

• No water in water tank. 

   

Fill water tank with fresh, cold water.

• Air blockage in pump. 

   

Fill tank with fresh water, and run pump in intervals using the Hot Water function. 

   

If no liquid pumps through the machine after numerous attempts, contact 

   

Customer Service.

• Water tank is not in the correct position. 

   

Push down firmly on water tank so it is fully engaged to the valve.

No steam produced from the frothing wand. 

• The Steam indicator is not selected. 

   

Ensure you push the Steam indicator prior to opening the steam control knob.

• Steam wand is blocked by milk or calcium deposits. 

   

Turn machine OFF. Carefully use a needle to loosen the milk residue. See 

   

chapter 14 for cleaning the steam wand.

Not enough froth when frothing milk. 

• Milk not fresh. 

   

Use the freshest milk possible. Do not use milk that has been opened for a 

   

few days as this can affect the quality of froth.

• Milk not suitable. 

   

Non-dairy, organic and ultra-pasteurized milks do not froth as well as fresh, 

   

dairy milk.

• Milk was too warm before frothing began. 

   

Use cold, refrigerated milk preferably at 34°F. Use a cold, stainless steel 

   

frothing pitcher.

Содержание CafeTS 129.05

















Отзывы: