4
OPERATING YOUR WINE CABINET
AND SETTING THE TEMPERATURE CONTROL
Please use the cabinet under 5-32 amb
℃
ient temperature, if the ambient temperature is
higher than or lower than this temperature, it will cause the temperature to fluctuate in the
cabinet, which may prevent it from reaching 3-18 .
℃
¾
Control system instruction
•
“Run”
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“Light “ Button
To control the inner light turn on/off.
•
“Power” Button
To control this
appliance turn on/off
( press and hold this buttons for approximately
3 seconds).
•
“Up” Button
Used to raise(warm) the temperature in 1 .
℃
•
“Down” Button
Used to lower(cool) the temperature in 1 .
℃
Setting the temperature controls
•
To set the temperature, Connect the power cord to a properly grounded outlet. In the event of
power interruption, the previous temperature setting is automatically erased and it will default
to a preset temperature setting of 12°C.
•
Set the desired cooling temperature by pressing the buttons adjacent to the “UP/DOWN"
program. Each depression of the buttons will scroll through the available temperature setting in
increments of 1 degree. The temperature selected will flash in the LED display for approximately
5 seconds, then revert back to display the temperature of the internal cabinet.
•
The temperature setting can be adjusted from 3°C ~18°C
•
To view the setting temperature, (anytime) press and hold the corresponding button for
approximately 5 seconds, the setting temperature will temporarily "flash" in the LED display for
5 seconds
•
Flashing LED
= Set Temperature
Steady LED
= Cabinet Temperature
