25
Instruction manual WF1552 & WF1553
Please keep this instruction manual for future reference
T R O U B L E S H O O T I N G
You can solve many common wine cabinet problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling
Caple Service.
P R O B L E M
P O S S I B L E C A U S E
The wine cabinet does not operate.
› Not plugged in.
› The appliance is turned off.
› The circuit breaker tripped or a blown fuse.
The wine cabinet is not cold enough.
› Check the temperature control setting. External environment may require
a higher setting.
› The door is opened too often.
› The door is not closed completely.
› The door gasket does not seal properly.
The compressor turns on and off
frequently.
› The room temperature is hotter than normal. A large amount of contents
has been added to the wine cabinet.
› The door is opened too often.
› The door is not closed completely.
› The temperature control is not set correctly.
› The door gasket does not seal properly.
The light does not work.
› Not plugged in.
› The circuit breaker tripped or a blown fuse.
› The bulb has burned out.
› The light button is “OFF”.
Vibrations.
Check to assure that the wine cabinet is level.
The wine cabinet seems to make too
much noise.
› The rattling noise may come from the flow of the refrigerant, which is
normal. As each cycle ends, you may hear gurgling sounds caused by the
flow of refrigerant in your wine cabinet.
› Contraction and expansion of the inside walls may cause popping and
crackling noises.
› The wine cabinet is not level.
The door will not close properly.
› The wine cabinet is not level.
› The door was reversed and not properly installed.
› The gasket is dirty.
› The shelves are out of position.
If the above table has not solved the problem please contact Caple Service by phone on
0117 938 7420
or by email
