4
l
To view the “set” temperature at any time, press and hold the corresponding button for
approximately 5 seconds, the “set” temperature will temporarily “flash” in the LED display for 5
seconds.
Door Lock
The door lock keys are located inside the plastic bag that contains the User Guide. Insert the key
into the lock and turn it anticlockwise to unlock the door. To lock the door do the reverse operation
making sure metal pin is engaged completely. Remove the key and place it in a secure place for
safekeeping.
Installation of Shelves
•
To prevent damaging the door gasket, make sure the door is fully open when pulling shelves out
of the rail compartment.
•
For easy access to the storage content, you must pull the shelves approximately 1/3 out of the
rail compartment; however this unit was designed with a notch on each side of the shelf tracks
to prevent bottles from falling.
•
Put the shelf gap (left and right) under the square plastic block, lift the shelf, then pull the shelf
from the Wine Cabinet.
NOTE:
If the unit is unplugged, if power is lost, or turned-off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
When you use the wine cabinet for the first time or restart the wine cabinet after it has been
switched off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length of the
