Caple WDU050 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 24

background image

8

Instruction manual WDU050

Please keep this instruction manual for future reference

E L E C T R I C A L C O N N E C T I O N

If you are not familiar with electrical installations and procedures, please contact a qualified
electrician.

DA N G E R

An incorrect earth connection can result in a risk of electric shock. Check with a qualified
electrician if you are in doubt as to whether the waste disposal unit is correctly earthed. Do
not modify the plug provided with the appliance, if it will not fit in the socket have a correct
connection installed by a qualified electrician.

These appliances are meant for household use, do not use in a commercial application.

E A R T H I N G I N S T R U C T I O N S

This appliance must be earthed. In the event of a malfunction or breakdown earthing provides
a path of least resistance for the electric current to reduce the risk of electric shock. This
appliance is equipped with a cord having an equipment earthing conductor and earthed plug.
The plug must be plugged into an appropriate socket that is correctly installed and earthed in
accordance with the local codes and ordinances.

If you are not familiar with electrical power and procedures, call a qualified electrician.

The power cord and/or connections must comply with local codes and ordinances.

F O R M O D E L S N OT E Q U I P P E D W I T H A C O R D :

› Choose a power cord not less than H 05V V-F, 3G1.0mm incorporate with a plug rated

250V 13A (fuse in plug:250V,10A) approved by BSI with matched ground wire for the UK

market (Standard: BS1363-1) or a plug rated 250V 16A approved by VDE with matched

ground wire (Standard: DINVDE0620-1).

› Chose a power cord not less than H05VV-F, 3G1.0mm and fitted with a switch, the switch

shall be directly connected to the supply terminals and shall have a contact separation

in all poles, providing full disconnect under overvoltage category III conditions (the full

disconnection not less than 3mm).

› Make sure the switch is easily visible and accessible. The recommend distance between this

appliance and electrical switch is within 2m.

«
...
6
7
8
9
10
...
»

Содержание WDU050

























Отзывы:

Нет отзывов

Похожие инструкции для WDU050

Бренд: P.Lindberg Страницы: 83

Бренд: Zanussi Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды