Caple WDI3300, Руководство по обслуживанию, Страница: 14 / 36

E21
In 3 minutes,
the water level
doesn’t
change with
pump started .
Drain hose
If the washer won't drain water
check the drain hose. Be sure the
hose did not get kinked behind
the washer. Also, remove the
hose from the pump and check it
for obstructions.
pump
If the washer won't drain water
the drain pump might be
defective. It's also common for a
small sock or other article of
clothing to get caught in the drain
pump or in the drain hose. Check
both for an obstruction before
replacing the pump.
PCB Check the PCB .
E30
Door will not
open.
Door lock
Check the door hook /catch and
the door lock to get correct
location.
PCB
If the washer door won't unlock
the problem might be the main
PCB. This is not common.
Check the inner wire between the
PCB and the door lock first .
E33
The PCB cannot
detect the signal
of the water level
sensor.
Water level sensor
Check the water level sensor
Check the PCB the inner
wire between PCB and the
sensor .
E34
Temperature
sensor fail
.
The temperature
sensor(NTC)
loose or faulty
connection
Check the NTC and connection .
E60
No motor action. The motor do esn't
roate 5 times
1.Check the PCB and the motor
2.Check the motor
w ir ing
connections.
6. ERROR CODES AND EXPLANATIONS