Caple WC6113, Инструкция по эксплуатации

Страница: 5 / 14

5
¾
Setting t he t emperature c ontrols
•
The temperature range can be set as low as
5
°C or as high as 18°C to suit your specific
storage requirements.
•
The standard temperature setting is 12°C.
•
When setting the temperature each press on the or button the temperature setting will
increase or decrease by 1°C. When the temperature setting reaches the upper limit 18ºC or
lower limit of
5
ºC, the temperature setting will not increase or decrease.
•
If you want to know the actual temperature, please press or for 3 seconds, the display
panel will show the actual temperature. After 5 seconds it will show the set temperature.
•
Flashing display = Cabinet Temperature
Steady display = Set Temperature
¾
Note:
•
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the Wine cabinet will not
start.
•
When you use the Wine cabinet for the first time or restart the Wine cabinet after having been
shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LCD readout. This is normal and it is due to the length of
the activation time. Once the Wine cabinet is running for a few hours everything will be back to
normal.
¾
Function i nstruction
•
Temperature Recollection Function
In the event of a power interruption, wine cabinet will remember the previous temperature
settings and when the power is recovered, the cabinet temperature will go back the same
setting temperature as power off.
• Open d oor a larm
When you forget to close the door or the door is not closed completely, the alarm will sound
after 5 minutes. Please close the door completely to avoid cold energy being lost.
•
Temperature a larm
If inner temperature is higher than 23°C, “HI” is shown in display panel, the alarm will sound
after one hour continuously. It inform that the inner temperature is too high, please check
for
the
possinble cause
.
If inner temperature is lower than 0°C, “LO” is shown in display panel the alarm will
sound in addition the malfunction indicator will light at the same time.