23
Please keep this instruction manual for future reference
Instruction manual TDI4001
NOTE:
› Close the porthole before pressing the
START/PAUSE
button.
› To start the selected cycle with the pre-set parameters, press START/PAUSE. When the
programme is running, the display will show the time to elapse.
› If you want to modify the chosen programme, press the desired options buttons, modify the
default parameters and then press START/ PAUSE button to start the cycle.
NOTE :
Only the options compatible with the set programme can be selected.
P R O G R A M M E D U R AT I O N
› When a programme is selected the display automatically shows the cycle duration, which can
vary, depending on the options selected.
› Once the programme has started you will be kept informed constantly of the time remaining to
the end of the drying cycle.
› The appliance calculates the time to the end of the selected programme based upon a standard
loading, during the cycle, the appliance corrects the time to the humidity level of the load.
P R O G R A M M E E N D
› “END” (“End” on some models) will appear in the display at the end of the programme, it is
now possible to open the door.
› At the end of the cycle, turn off the appliance by turning the programme selector to the
off position.
NOTE:
The programme selector must always be turned to the Off position at the end of the drying cycle
before a new one can be selected.
PAU S I N G T H E M AC H I N E
› Keep the START/PAUSE button pressed for about 2 seconds (the name of the programme and
the residual time display will flash, showing that the machine is paused).
› Press the START/PAUSE button again to re-start the programme from the point it had been
paused at.
