Caple TDI4000, Инструкция по эксплуатации

Страница: 22 / 34

Instruction manual TDI4000
Please keep this instruction manual for future reference
22
3 - RAPID BUTTON
It is possible to switch an automatic programme to a RAPID programme, up to 3 minutes after the
start of the cycle. The progressive pressure increases the time (30-45-59 minutes).
After this selection, it is necessary to reset the automatic drying function to switch off the dryer. In
case of incompatibility, all LEDs flash quickly 3 times.
4 - DRYING SELECTION BUTTON
This allows you to select the required dryness level, it is possible to choose for up to five minutes
after the start of a drying cycle:
Ready to Iron
: Leaves the garments slightly wet to facilitate ironing.
Hanger Dry
: To make a garment ready to be hung on a coat hanger.
Wardrobe Dry : For laundry that can be directly stored.
Extra Dry : To get completely dry garments; ideal for full load.
This appliance is equipped with a Drying Manager Function. On automatic cycles, each level of
intermediate drying, prior to reaching the one selected is indicated by a flashing neon light that
indicates the degree of dryness that the garments have reached. In case of incompatibility, all LEDs
flash quickly 3 times.
5 - DELAY BUTTON
It allows to delay the start of the programme from 1 to 24 hours in 1-hour intervals. The delay
selected is shown on the display. After pressing the START button the time showed decreases hour
by hour. If you open the porthole door with delayed start set, after re-closing the porthole, press
start again to resume the counting.
6 - MEMORY BUTTON
This option allows you to store the options set on a cycle. STORAGE When the cycle is running
push the “memory” button for three seconds. The control light “memory” flashes three times and
stores the set options connected to the cycle currently in progress. Recall: After the selection of the
cycle, push the button “memory” for recall of the stored options (not the cycle).