Caple RIL125, Инструкция по эксплуатации

Страница: 14 / 36

14 Instruction manual RiL125
Please keep this instruction manual for future reference
T E M P E R AT U R E C O N T R O L D I A L :
The temperature in the appliance is controlled by the temperature control dial or thermostat
located inside the fridge. Rotate the control dial left or right to regulate the temperature inside
the fridge.
NOTE:
0 is the Off setting, 1 is the warmest setting and 7 is the coldest setting.
Depending on the ambient temperature of the room the appliance is situated in, you may
need to adjust the temperature control dial; in a room with a high ambient temperature, the
temperature control dial may need to be adjusted to a colder setting (moved towards setting
7) or in a room with a low ambient temperature the temperature control dial may need to be
adjusted to a warmer setting (moved towards settings 5 or 4).
Setting 7 should be used as a rapid cool/freeze setting and should only be set 2 hours before
a large amount of food is placed in the fridge. The temperature control should be put back to
setting 5 after the food has been placed in the fridge, if this is not done the temperature in the
fridge compartment could fall below 0ºC as the compressor will run continuously.
Once the temperature control has been set, close the door and plug in the appliance. We
recommend that the door is not opened for a minimum of 4 hours to allow the appliance to
reach the standard operating temperature.
NOTE:
The standard operating temperature should be between 0ºC and 4ºC. The temperature
of freshly stored food and how often the door is opened affects the temperature in the
refrigerator compartment. If required, change the temperature setting.